- Home
- Products
-
-
Solids Control Equipment
- Linear Motion Shale Shaker
- Decanter Centrifuge
- Mud Cleaner
- Vacuum Degasser
- Centrifugal Pump
- Shear Pump
- Submersible Slurry Pump
- Mud Agitator
- Mud Gun
- Jet Mud Mixer
- Desilter
- Water Tank
- Mud Tank
- Diesel Tank
- MD210 Drilling Mud Cleaner
- Balanced Elliptical Motion Shale Shaker
- Oilfield Drilling Mud Desander
-
Solids Control System
- Drilling Mud Cooling System
- Solids Control System
- Mobile Solids Control System
- Arctic Solids Control System
-
TBM
- Tunnel Boring Mud System
-
HDD
- HDD Mud Recovery System
-
-
- News
- Services
- Marketing
- About Us
- Contact Us
- Videos
Home > KOSUN News >
Drill cuttings dryer is used in oil-based mud treatment system
Jul 28, 2021
Drill cuttings dryers have been widely used in oil-based mud treatment systems:
1. Efficient solid-liquid separation, reducing solid phase emissions;
2. The liquid phase can be recycled and reused in the drilling solids control system;
3. Reduce drilling fluid costs and waste disposal costs;
4. Realize the on-site operation requirements that the mud does not fall to the ground;
5. Easy and fast to use, long time to use, which can effectively reduce product cost.
1. Efficient solid-liquid separation, reducing solid phase emissions;
2. The liquid phase can be recycled and reused in the drilling solids control system;
3. Reduce drilling fluid costs and waste disposal costs;
4. Realize the on-site operation requirements that the mud does not fall to the ground;
5. Easy and fast to use, long time to use, which can effectively reduce product cost.
Drill cuttings dryer is also called mud dryer, which is a kind of centrifuge. The spin dryer is a centrifugal separator that uses centrifugal filtration to separate the components in the suspension. There are many holes on the wall of the rotary drum of the drill cuttings dryer, and the inner surface of the rotary drum is covered with a filter medium. The suspension added to the drum rotates with the drum to generate a large centrifugal pressure. Under the action of the pressure, the liquid in the suspension flows through the filter medium and the holes on the drum wall and is thrown out, and the solids are trapped on the surface of the filter medium. Realize the separation of solid and liquid. The centrifugal force generated by the suspension in the drum is thousands of times that of gravity, which strengthens the filtration process, speeds up the filtration, and obtains a filter residue with a lower moisture content. Suspensions with solid particles larger than 0.03 mm can generally be used with drill cuttings dryers.
