Mud zero discharge is the key to drilling waste treatment. It is the result of improved drilling technology, replacing traditional mud pools, reducing drilling environmental pollution and improving the necessary methods for environmental protection. T
Mud zero discharge is the key to drilling solids control and drilling waste treatment Read More »
KOSUN Vertical cuttings dryer is a new type of solid-liquid separation and drying equipment . It does not need to add medicines. The screen basket is not easy to be blocked. It occupies a small area. It is easy to install and operate. The maintenance
KOSUN’s Solid-liquid Separation and Drying Equipment-Vertical cuttings dryer Read More »
Trenchless directional crossing on-site feedback, using a new type of Slurry S eparation S ystem , it will not cause cloggingcompared with belt filter press, and the use of double-layer screen, the purification effect is nearly 50% higher than that of
Slurry Separation System for directional crossing construction Read More »
The Petroleum S olids C ontrol M ud T ank is used to store the mud transported between the drilling wellhead and the mud pump. Petroleum S olids C ontrol M ud T ank s are often referred to as mixing tanks, storage tanks or supply tanks. Petroleum soli
Classification of Solids Control Mud Tank by Purpose Read More »
1. Features Sewage acid wastewater is very acidic. After neutralization and removal of fluoride, the salinity of the wastewater increases, the hardness is high, and the pH value rises to 9-11. Wastewater contains zinc, copper, lead, cadmium, arsenic, nickel and other metal ions, as well as fluoride, nitrate, organic matter, colloidal particles and other pollutants. If the raw water directly enters the membrane system, the membrane will produce less water and be easily blocked. It must be softened first, and then the heavy metal ions and COD in the sewage must be removed. After the advanced membrane treatment system, the produced water can be reused. 2. Composition According to the source and characteristics of wastewater, there are mainly cooling water, pickling wastewater, washing wastewa
Metallurgical Wastewater Treatment Solutions Read More »
KOSON mud gun relies on the high-pressure fluid flow in the mud pipeline to generate high-pressure jet impact force through the nozzle of the mud gun to flush the sediment at the bottom of the drilling mud tank to make it suspended. The main function
Coordination relationship between mud gun and mud agitator Read More »
READ: Drilling solids decanter centrifuge, the fourth solids control equipment, mainly contends with suspension containing solids diameters beyond 2m, drilling mud and separated fluid phase. It ought to be well installed far from the inlet of borehole
Six Steps to Install Drilling Fluids Decanter Centrifuge Read More »
The shale shaker has the technological characteristics of large amplitude, large vibration intensity, low frequency and elastic screen surface. The maximum opening ratio is always maintained during the working process, so that the screening efficiency
Classification and working principle of shale shaker Read More »
Oilfield drilling mud is a working fluid with the function of lubricates, cools, protects arms, transmits drilling cuttings and balances bottom pressure during oilfield drilling. Drilling waste mud consists of a small amount of mud discharged during drilling and a large amount of mud discharged after completion. The main components are bentonite, drilling cuttings, water and various chemical additives. Because the waste mud contains a variety of toxic and harmful pollutants such as alkali, salt, oil, etc., it is difficult to deal with, so oily sewage and dirty oil are called the three major public hazards in oil fields. With the provisions of the national environmental protection law and the enhancement of peoples awareness of environmental protection, the petroleum industry has stepped up
