Industry Update

Industry news, technical insights, and updates on solids control, mud treatment, and waste management.

Introduction of cyclone for solid phase control of drilling fluid

The hydrocyclone for solid phase control of drilling fluid is a vertical conical vessel with a cylindrical part, and its structure is shown in the figure. The cylindrical part of the upper part of the cone is the slurry inlet chamber, the inner diameter of which is the specification size of the cyclone, and the side part has all the grouting inlet; There is a vortex duct in the top center to form the overflow port. The lower part of the shell is conical, and the cone Angle is 150 ~ 200°. The opening at the bottom is called the bottom flow opening, and its caliber is adjustable.

Introduction of cyclone for solid phase control of drilling fluid Read More »

KOSUN Solid Control equipment Mud storage tank: key equipment for mud treatment

The mud storage tank manufactured by KOSUN solid control equipment is an important part of the mud treatment system. As a key equipment in oil and gas drilling operations, it is used to store and treat drilling mud, cementing mud, etc. It plays an important role in oil, natural gas, geological exploration and other fields. Its design and performance are directly related to the efficiency, safety and cost of drilling operations.
First, KOSUN solid control equipment mud storage tank structure
Mud storage tank is usually composed of tank body, mixing system, level gauge, import and export pipeline, etc. The tank body is generally made of high-strength steel plate, which has good sealing and corrosion resistance. The mixing system is used to prevent the mud from settling and solidifying, ensu

KOSUN Solid Control equipment Mud storage tank: key equipment for mud treatment Read More »

Xi’an KOSUN drilling fluid purification method

In the drilling process, the drill bit breaks the rock while drilling, the drilling fluid brings the cuttings to the surface, and the cuttings in the drilling fluid are removed by solid control equipment. Even when drilling in clay layers, unnecessary clay particles need to be removed to maintain drilling fluid performance. The process of removing the solid phase content in drilling fluid is called the purification of drilling fluid.

Xi’an KOSUN drilling fluid purification method Read More »

Six Application Areas of Mud Recovery System

Sludge water recovery device is a kind of necessary equipment which can effectively solve the reduction treatment of engineering mud. It can be widely used in: construction piling mud-water separation, pipe jacking construction mud-water separation, shield subway construction mud-water separation, river sludge separation treatment, tailings mud-water separation, contaminated soil remediation and other fields.

Six Application Areas of Mud Recovery System Read More »

How to extend the service life of vacuum degasser?

Vacuum degasser is a new type of special equipment used to deal with gas invading drilling fluid, also known as negative pressure degasser, which can quickly remove various gases invaded into drilling fluid, which plays a very important role in restoring the specific gravity of mud and stabilizing mud performance. At the same time can be used as a high-power mud agitator, suitable for all kinds of mud circulation purification system. The equipment belongs to the negative pressure degasser, scientific and reasonable design structure, can realize the effective separation of gas and liquid, filter out impurities, and ensure that the gas pipe is always smooth.

How to extend the service life of vacuum degasser? Read More »

Commonly used valve introduction butterfly valve The butterfly valve is a kind of valve that is used to open, close and adjust the fluid channel by rotating the disc type opening and closing part about 90°.

Advantages:
1, simple structure, small size, light weight, consumables, do not use in large diameter valves;
2, fast opening and closing, small flow resistance;
3, can be used with suspended solid particles of the medium, according to the strength

Commonly used valve introduction butterfly valve The butterfly valve is a kind of valve that is used to open, close and adjust the fluid channel by rotating the disc type opening and closing part about 90°. Read More »

×

Get a Free Quote